How to use the Unit Converter
Choose a category, enter a value, and select the source and destination units. Use Swap to reverse the unit direction. The formula or conversion factor explains the result, and the quick table shows the same value in every supported unit within that category.
Check regional labels before converting volume or weight. A US gallon differs from a UK gallon, and a metric ton differs from US short and UK long tons. International definitions such as exactly 2.54 centimeters per inch and 0.45359237 kilograms per pound are used. Temperature conversions may need an offset as well as a scale factor; time entries for months and years use averages rather than specific calendar dates. All conversion work runs on your device.
Step-by-step guide
- Select Length, Weight, Temperature, Area, Volume, Speed or Time.
- Enter the measurement and choose its original unit.
- Select the unit you want to convert to, checking US and UK labels where shown.
- Read the result alongside the formula or conversion factor.
- Use the quick table for other units, or Swap to reverse the selected pair.
Practical examples
Convert inches to centimeters
Ten inches equals 25.4 centimeters because 10 × 2.54 = 25.4. The factor is exact: one international inch is defined as 2.54 centimeters, not an approximate rule of thumb.
Translate a Celsius temperature
For 100 °C, use (100 × 9 ÷ 5) + 32 = 212 °F. The added 32 is essential. Celsius-to-Fahrenheit temperature readings cannot be converted with a multiplier alone.
Distinguish a US gallon
One US gallon equals exactly 3.785411784 liters. Select the explicitly labeled US gallon when a US recipe or specification uses that unit; choosing UK gallon would describe a different volume.
Convert pounds to kilograms
Two pounds equals 0.90718474 kilograms using 2 × 0.45359237 = 0.90718474. The pound-to-kilogram definition is exact, though a rounded display or a measuring scale may show fewer decimal places.
Benefits
01
Compare more than one destination unit
The category table lets you inspect a measurement in several units at once instead of repeatedly replacing the destination selection.
02
Make regional differences explicit
Separate US and UK volume units, plus metric, short and long tons, help avoid treating similarly named measurements as interchangeable.
03
Understand the calculation
Visible factors and formulas show whether a conversion uses multiplication alone or, for temperature, also needs a change of zero point.
Common use cases
- Convert furniture dimensions between inches and centimeters.
- Compare package weights in pounds and kilograms.
- Translate a temperature reading between Celsius and Fahrenheit.
- Convert recipe volumes while checking regional unit definitions.
- Compare speeds in kilometers per hour, miles per hour or knots.
Frequently asked questions
What measurements can I convert?
There are seven categories. Length runs from nanometers through kilometers and miles, including nautical miles. Weight includes milligrams, grams, kilograms, ounces, pounds, stone and three ton definitions. Area includes metric and imperial square units, hectares and acres. Volume includes metric, US customary and selected UK units. Speed, temperature and time have their own unit lists.
Are inch and pound conversions exact?
Yes. The international inch is exactly 2.54 centimeters, and the international pound is exactly 0.45359237 kilograms. These definitions are exact; the precision of your input measurement is a separate matter.
Why must I choose US or UK volume units?
US and UK pints and gallons have different volumes. The tool labels them separately. The teaspoon, tablespoon, fluid ounce, cup and quart options are US units, so confirm the convention used by your source.
Which temperature scales are supported?
Celsius, Fahrenheit, Kelvin and Rankine are supported. Temperature formulas account for scale and zero-point differences. Enter an actual temperature reading; a temperature difference is a different calculation when an offset is involved.
What do average month and average year mean?
The average year uses 365.2425 days, and the month option is an average rather than a particular named month. These are duration conversions, not calendar calculations. They do not tell you the exact number of days between two dates.
Can I convert an area by using the length multiplier?
Not directly. Square units require squared length factors, while cubic units require cubed factors. Choose Area or Volume so the appropriate conversion is applied instead of treating square or cubic measurements as lengths.